Tel+86-13853191119     E-mailmichael@eastmedcn.com

You are here: HOME » NEWS » PRODUCTS NEWS » Characteristics and uses of medical protective clothing

Characteristics and uses of medical protective clothing

Views:1     Author:Site Editor     Publish Time: 2020-03-25      Origin:Site

Introduction

Medical protective clothing is the work clothes of medical personnel, which isolates germs, harmful ultrafine dust, acidic solutions, and salt solutions, and keeps the environment clean. Adopt PP (polypropylene, 62% of the total) non-woven material, and cover with a special breathable membrane for protective clothing, which is highly breathable and anti-static; better anti-permeability, resistant to a variety of organic solvents, acid and alkali corrosion At the same time, it has high impact resistance. Strong mechanical properties, soft and comfortable texture. Non-combustible, non-toxic and non-irritating, harmless to the skin.


Features of this section

Characteristics and uses of protective clothing


1: Ordinary pp non-woven protective clothing Dust-proof, leading inspection work, etc. Use in general environment.


2: peritoneal non-woven protective clothing (airtight, waterproof, good bacteria isolation effect, there is a clear distinction between positive and negative sides, the side of the body is non-woven, non-allergic, feel good, there is a plastic film on the outside to prevent liquid leakage For use in places with pollution and viruses, the main use of hospital infectious wards is coated non-woven protective clothing.


3: SMS non-woven protective clothing (three-layer composite non-woven fabric, with a layer of waterproof bacteria-proof layer in the middle, the outer layer is a PP non-woven fabric with sesame dot pattern, strong and tensile, bacteria-proof waterproof and breathable function. Generally used for Bacteria culture laboratory, sterile surgical operating room and other 100,000-level purification environment.)


4: breathable film non-woven protective clothing (bacteria-proof, waterproof, slightly breathable, soft texture, is the highest medical protective clothing for medical protection, the inner layer is 40 grams of high-grade filament non-woven fabric, the outer layer has a layer of 20 grams of Unidirectional breathable PE film. It is characterized by the sweat of the human body can be radiated outward, but the harmful gases and moisture outside can not invade.


1. Fully connected, front opening.


2. Strong and durable, resistant to tearing and abrasion, comfortable, soft, lightweight, breathable, lint-free, anti-pollution, and anti-static.


3. It can penetrate air and water vapor, but can repel water-based liquids and aerosols.


4. Made of 100% high-density polyethylene without fillers, adhesives, and silicon.


5. The surface is smooth to repel inorganic liquids, to prevent chemical substances from splashing, and to make solid dust difficult to adhere.


6. Special coating treatment, 100% dust-proof performance can effectively prevent harmful ultra-fine dust, high concentration of inorganic acids, alkalis and salt solutions.


Tel+86-13853191119        E-mailmichael@eastmedcn.com

HOME

Copyright   Eastmed Healthcare Products Co., Ltd. All rights reserved.  Technical Support: e-qilai