Tel+86-13853191119     E-mailmichael@eastmedcn.com

You are here: HOME » NEWS » PRODUCTS NEWS » Experimental steps of the principle of infusion set

Experimental steps of the principle of infusion set

Views:1     Author:Site Editor     Publish Time: 2020-11-24      Origin:Site

Urgent use The specific experimental steps for determining the principle of use of the infusion set:

Under atmospheric pressure, the liquid in the bottle flows into the drip hopper along the thin infusion hose. When the water column pressure of the drip hopper is greater than the venous pressure, the liquid in the bottle flows into the vein along the hose.



Experimental steps:

Before using the medical staff, check the disinfection validity period of the disposable infusion set and whether there is any air leakage or other abnormalities in the packaging. Take out the infusion set, insert the conical connector part into the infusion bottle, hang the infusion bottle on the infusion rod, and exhaust until the liquid flows to the infusion. At the lower end of the tube, close the regulator, and then pierce the venous needle into the sterilized vein. After fixing it, untie the tourniquet and adjust the flow rate.

Precautions

1. It is a disposable product and should meet the corresponding national hygiene and quality standards.

2. No cross use

3. The disposable infusion set should be treated as medical waste after use.


Tel+86-13853191119        E-mailmichael@eastmedcn.com

HOME

Copyright   Eastmed Healthcare Products Co., Ltd. All rights reserved.  Technical Support: e-qilai